Product Name: Kingston Value 8GB DDR4 (KVR26N19S8-8) 2666MHz
Model: KVR26N19S8-8
This document describes ValueRAM’s KVR26N19S8-8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features of Kingston Value 8GB
Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP – 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self-refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
Specifications of Kingston Value 8GB
CL(IDD) 19 cycles
Row Cycle Time (tRCmin) 45.75ns(min.)
Refresh to Active/Refresh 350ns(min.)
Command Time
Row Active Time (tRFCmin)32ns(min.)
Maximum Operating Power (tRASmin) TBD W
UL Rating 94 V – 0
Operating Temperature 0o C to +85o C
Storage Temperature -55o C to +100o C
Explore the entire range of Kingston Value 8GB DDR4 available on Pcadda, Shop more DDR4 Ram for Pc & Laptop here. You can browse through the complete world of Ram
Also, Check Out Kingston Value 4GB (4GBx1) DDR4 2666MHz
Reviews
There are no reviews yet.